Handmade in College Station, TX

Stop the
Clog.
For Good.

The HVAClean inline condensate filter installs in 20 minutes, catches algae and debris before they reach your drain, and cleans out in under 2 minutes — protecting your home from one of the most common (and most ignored) HVAC failure points.

Order Now — $34.99 See How It Works ↓

$34.99

Per Unit

20min

DIY Install

¾"

Universal Fit

Made Here

HVAClean Filter

^$34.99 · free shipping

In Stock — Ships in 5–7 Days

🚚 Free USPS Priority · Made to order in TX

The Problem

Your HVAC Drain Line Is a Ticking Time Bomb

Condensate drain lines are dark, warm, and wet — the perfect environment for algae and slime to thrive. When they clog, the water has nowhere to go. And in Texas humidity, it happens every single summer.

🦠

Algae Grows Fast

Texas heat and humidity make condensate lines one of the fastest-clogging drain systems in any home. Most HVAC service calls in the summer are for exactly this problem.

💧

Water Backs Into Your Home

A blocked condensate line backs water up into your air handler and eventually your ceiling or walls — causing mold, drywall damage, and expensive remediation.

💸

The Repair Bill Keeps Coming

HVAC techs charge $75–$250 to snake a condensate line. Without a permanent solution, it clogs again the following season. HVAClean pays for itself after one service call.

How It Works

Set It.
Forget It.
Rinse Once a Year.

Find Your Condensate Drain Line

Look for the ¾" PVC pipe coming off your indoor air handler — usually in the attic, utility closet, or mechanical room. Most homes have one; two-story homes often have two.

Cut In & Connect

Cut a short section of the drain line. Slip the HVAClean barbed fittings into each cut end and secure with the included hose clamps. No glue, no threading, no special tools.

It Catches What Would Clog Your Drain

As your AC runs, condensate water flows through the filter chamber. Algae, debris, and slime accumulate inside the filter — not in your drain line.

Twist, Rinse, Reinstall

Once or twice a cooling season, unscrew the lid, dump and rinse the chamber with water or a splash of white vinegar, and replace. Two minutes, done.

Lid removed — tool-free access THREADED INTERIOR

Condensate Line Schematic

From Unit

→

🔩

HVAClean

→

To Drain

✓ Algae and debris trapped inside filter chamber
✓ Clean water continues to drain normally
✓ Screw-off lid — no tools, no plumber required
✓ Works with existing ¾" PVC drain lines

Why HVAClean

Built by a Homeowner.
For Homeowners.

TJ built what the HVAC industry never bothered to make — a simple, permanent fix to the most common drain problem in the South.

🧱

PETG Construction

High-temperature PETG thermoplastic handles attic heat, moisture, and UV without warping or cracking. Built to outlast your HVAC system.

🔓

Tool-Free Lid

The screw-off lid requires zero tools to access. Open, dump, rinse, close — the whole cleaning process takes less time than reading this sentence.

🔧

Drop-In Compatible

Designed around the standard ¾" PVC condensate lines found in the vast majority of residential split HVAC systems in the U.S.

♻️

Reusable — Forever

Not a disposable cartridge. There's nothing to replace. Clean it and keep using it. One purchase, permanent protection.

🌡️

Attic-Ready

Rated for continuous exposure above 140°F — tested in real Texas summer attic conditions where most plastics fail.

🤠

Made in Texas

Designed, printed, and shipped by hand in College Station, TX. Every unit is personally inspected before it ships to you.

Specifications

Will It Fit My System?

HVAClean is designed for the standard ¾" PVC condensate drain line found in most residential split-system air conditioners and heat pumps — which covers the overwhelming majority of U.S. homes built after 1990.

Not sure of your drain line size? Look for the pipe size printed on the PVC pipe itself, or send us a quick photo at orders@hvaclean.net — we'll confirm before you order.

✓ Compatible with most residential split-system AC & heat pump units
✓ Works with standard ¾" Schedule 40 PVC condensate lines
⚠ 1" line variant coming soon — contact us to be notified

Inlet / Outlet

¾" barbed fittings

Material

PETG (high-temp 3D print)

Max Continuous Temp

~80°C / 176°F

Body Diameter

~3.5 inches

Overall Height (w/ lid)

~4.5 inches

Lid Type

Screw-off, tool-free

Includes

Filter body, lid, 2× barbed fittings, 2× hose clamps

Installation Time

~20 minutes

Cleaning Frequency

1–2× per cooling season

Warranty

30-day satisfaction guarantee

Manufactured

College Station, TX — USA

🧑‍🎨

Photo of TJ

Replace with real portrait

Inventor
&
Maker

The Story

A Tattoo Artist Who Got Fed Up Paying the Same Bill Every Summer

TJ is the owner of Big Daddy's Tattoo Studio in College Station, Texas. Like most Texas homeowners, he dealt with a backed-up HVAC condensate line every summer — and paid for it every time.

After one too many service calls for the exact same problem, he did what craftsmen do: he figured it out himself. Using 3D printing skills he'd developed over years of making custom parts and tools, TJ designed, prototyped, and refined an inline condensate filter that anyone can install in minutes.

The result is HVAClean — hand-printed and personally inspected by TJ in College Station before every single shipment. This isn't a factory product. It's an invention from someone who got tired of a problem that had a simple solution nobody had built yet.

Order Now

Ships from College Station in 5–7 Days

Every unit is made to order by TJ. Free USPS Priority shipping to anywhere in the continental U.S.

Place Your Order

Fill out this form and TJ will reach out within 24 hours with a payment link (Venmo, PayPal, or card).

First Name

Last Name

Phone (for shipping updates)

Shipping Address

City

State & ZIP

Order

Notes (drain line size, questions, etc.)

⚠ This sends your order request directly to TJ. He'll follow up within 24 hours with a payment link. No card info is collected here.

🔒 Your info goes only to TJ — never sold or shared

Early Reviews

What Homeowners Are Saying

★★★★★

"Installed it in my attic in about 20 minutes. No clue how I went so many summers without something like this. My HVAC has been running perfectly since and I haven't touched it once."

— Early Beta Customer, College Station TX

★★★★★

"Had two service calls last summer for the same backed-up drain line. Installed HVAClean in the fall and went through this entire summer without a single issue. Paid for itself immediately."

— Early Beta Customer, Bryan TX

★★★★★

"I'm an HVAC tech and I wish this had existed years ago. I've already started recommending it to every homeowner I work with. Simple, reusable, and it actually solves the problem."

— HVAC Technician, Central Texas

EARLY REVIEWS — REAL QUOTES WILL BE ADDED AS ORDERS SHIP

FAQ

Questions? Got Answers.

Will HVAClean work with my HVAC system?

▼

HVAClean is designed for residential split AC and heat pump systems with ¾" PVC condensate drain lines — which covers the majority of U.S. homes. You can usually find the pipe size printed directly on the PVC. If you're unsure, email a photo of your drain line to orders@hvaclean.net and TJ will confirm before you order.

How hard is the installation?

▼

If you're comfortable with a utility knife and a screwdriver, you can do this in 20 minutes. The filter comes with everything you need — fittings, clamps, and an instruction card. You cut a section of your PVC drain line, push the barbed fittings in on each end, tighten the clamps, and you're done. A video walkthrough is coming soon.

How often do I need to clean it?

▼

In most climates, once at the start of cooling season is enough. In very humid areas like the Texas Gulf Coast, check it mid-summer as well. Cleaning takes under 2 minutes — twist off the lid, rinse the chamber with water or a little white vinegar, replace the lid, done.

What's it made from?

▼

HVAClean is 3D printed from PETG — a high-quality thermoplastic known for heat resistance, chemical resistance, and durability. It won't warp in attic temperatures and is safe for continuous water contact. It's the same material used in water bottles, food containers, and medical devices.

How do I pay?

▼

Submit your order through the form on this page. TJ will follow up within 24 hours with a payment link via Venmo, PayPal, or card through Square. Full card checkout directly on the site is coming soon. Your order is not confirmed until payment is received.

Do you ship outside Texas?

▼

Yes — free USPS Priority shipping to anywhere in the continental U.S. Alaska and Hawaii orders, please email us first at orders@hvaclean.net so we can confirm a shipping cost before you order.

What's the return policy?

▼

30-day satisfaction guarantee. If HVAClean doesn't work in your setup within 30 days of receiving it, contact TJ at orders@hvaclean.net and he'll make it right — full refund or replacement, your choice. No hassle, no hoops.

Can I buy multiple units?

▼

Absolutely. The two-pack is $59.99 (saves $10) and is perfect for two-story homes or properties with multiple air handlers. Need 5 or more? Select "Bulk / Commercial" in the order form — TJ handles wholesale and contractor pricing on a case-by-case basis.

Stop theClog.For Good.

Your HVAC Drain Line Is a Ticking Time Bomb

Algae Grows Fast

Water Backs Into Your Home

The Repair Bill Keeps Coming

Find Your Condensate Drain Line

Cut In & Connect

It Catches What Would Clog Your Drain

Twist, Rinse, Reinstall

Built by a Homeowner.For Homeowners.

PETG Construction

Tool-Free Lid

Drop-In Compatible

Reusable — Forever

Attic-Ready

Made in Texas

Will It Fit My System?

A Tattoo Artist Who Got Fed Up Paying the Same Bill Every Summer

Ships from College Station in 5–7 Days

Place Your Order

What Homeowners Are Saying

Questions? Got Answers.

One Filter.No More Clogs. Ever.

Stop the
Clog.
For Good.

Built by a Homeowner.
For Homeowners.

One Filter.
No More Clogs. Ever.